Irrigation Accessories

3/4" female threaded flex hose pump adapter. Perfect for Danner Mag-Drive pumps.

Designed with an extra large bore so nutrient can flow easily. The single barb & thin edges ensures that the hose stays on & conforms to give a smooth contour to the inside of the junction between the hose & the fittings.

A polypropylene fitting designed to control, disperse, slow and divert water through a low pressure irrigation system. Used in conjunction with low pressure poly tubing.

1" fill/drain fitting. This is the fitting that is commonly used to transfer nutrient solution between the flood table and the reservoir in flood & drain hydroponic systems via 1" tubing and a pump.

The Current Culture H2O bulkhead wrench is designed to easily and securely tighten both the 2” and 3” UC Spin Tight Bulkheads.

Commercial grade black vinyl tubing to make your own hydroponic systems. Easy to use flexible thick wall tube. Made in the USA.

Black Flexible 1/2" Hose for your irrigation systems and tanks, and to complete your own hydroponic systems.
BLACK FLEXIBLE HOSE 1/2'' (5/8 EXT) x 200 FT/ Sold by the foot

Antelco's Miracle Punch is used to assist in the installation of micro irrigation systems.

1/2" blue tubing for irrigation systems & tanks. Excellent choice to complete hydroponic systems. The material is easy to cut to size but will remain strong & reliable.

High Volume output with gentle umbrella pattern. Flow & coverage can be altered by rotating the cap.

Bulk Head fittings are designed to create a water tight seal when transferring liquid from or to a storage container/reservoir. Made from durable ABS Plastic & come with a gasket washer for a secure seal.

The Adapter Male Insert is designed with an extra large bore so nutrient can flow more easily. The single barb & thin edges ensure that the hose stays on & conforms to give a smooth contour to the inside of the junction between the hose & the fittings.